|
ATPL 10 AIR LAW AND ATC PROCEDURES |
| 10.06 - Air Navigation Services – Aircraft operations |
|
1
At what moment during the approach should the reported airfield altimeter setting be set?
When passing the transition level |
|
2
The transition altitude of an aerodrome should not be below:
3000 ft. |
|
3
The vertical position of an aircraft at or below the transition altitude will be reported:
As altitude. |
|
4
The vertical position of an aircraft at or above the transition level will be reported :
As flight level. |
|
5
Transition from altitude to flight level, and vice- versa is done: descent.
At transition altitude during climb and transition level during |
|
6
In the vicinity of an aerodrome that is going to be used by the aircraft the vertical position of the aircraft shall be expressed in:
Altitude above sea level on or below the transition altitude |
|
7
The pilot of a departing aircraft flying under ifr shall change the altimeter setting from qnh to standard setting 1013.25 hpa when passing:
Transition altitude. |
|
8
During flight through the transition layer the vertical position of the aircraft should be expressed as
Altitude above mean sea level during descent |